For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. When the top menu is displayed, click on the menu item you want to operate. When “IP Control” is set to “Always On”, it consumes more standby power. Connecting to the Web Interface via IP Address, Connecting to the Web Interface via UPnP (Windows 8/7/Vista), Connecting to the Web Interface via Bonjour (Mac OS X), Connecting to the Web Interface via wired PC, Configuring the Advanced Network Settings. Enter the IP address of your Extend into your web browser using your PC. Sus­pend net­work func­tion dur­ing standby. Enter the default username and password (you can … Enter the IP address of your Extend into your web browser using your PC. You can use the “Save” and “Load” functions to store or recall various function settings using web control from a PC. Enter the IP address of this unit in browser’s address box. When using the web control function or Denon Remote App, use with the “IP Control” setting set to “Always On”. Select IP… Network is on during standby. IP Control. Select the AVR that you have your HEOS Drive is connected to. Connecting an iPod or USB memory device to the USB port, Playing back files stored on a PC and NAS, Operating external devices with the remote control unit, Types of input signals, and corresponding sound modes. “Always On”---Use this setting when using the AVR-X3000 Connected in a network. Enables network communication in standby power mode. To memorize settings, click “Save” on the Setup Menu screen. Copyright © 2014 D&M Holdings Inc. All Rights Reserved. Connecting to the Web Interface via IP Address. When using the web control function or Denon Remote App, use with the “IP Control” setting set to “Always On”. Net­work is on dur­ing standby. Copyright © 2014 D&M Holdings Inc. All Rights Reserved. Determine the IP address of your Extend using the “About” feature described above. Enables network communication in standby power mode. Main unit op­er­a­ble with a net­work com­pat­i­ble con­troller. Main unit operable with a network compatible controller. (1)Press SETUP MENU button, then Menu appears on FL-display (and GUI) (2)Select “Setup Menu > Network > IP Control” (3)Set parameters described below. Determine the IP address of your Extend using the “About” feature described above. IP Control is available for Denon AV receiver models sold after 2010 which are connected to the same network as the HEOS Drive and Controller devices. Select IP. Enter the default username and password (you can change this using the Web Interface). IP Control is available for Denon AV receiver models sold after 2010 which are connected to the same network as the HEOS Link and Controller devices.