Important note: In the beginning I mentioned that in order to record properly, the AT2020 will need a phantom power supply. The AT2020 is a condenser microphone, has a frequency response of 20Hz to 20kHz, and it’s designed for studio use, mainly recording vocals. AT2020: Frequency Response: 20-20,000 Hz: Impedance: 100 ohms: Element: Fixed-charge back plate, permanently polarized condenser: Polar Pattern: Cardioid: Open Circuit Sensitivity –37 dB (14.1 mV) re 1V at 1 Pa: Output connector: Integral 3-pin XLRM-type: Phantom Power Requirements: 48V DC, 2 mA typical: Maximum Input Sound Level : 144 dB SPL, 1 kHz at 1% T.H.D. And with a maximum sound pressure level rating of 144 dB SPL, the AT2020 USB is a solid choice for tracking loud sources, like drums or guitar amps. The entire audio circuit and transformer fit on a 44mm diameter PCB that also supports the capsule mounting post. The reason why the Audio-Technica AT2020 has better frequency response range is due to its low-mass diaphragm. As the effect, it can deliver better bass performance, with fuller and more solid lows. Audio-Technica's original AT2020USB microphone had a more … read more limited frequency response, but this "Plus" version extends the highs to 20 kHz, allowing you to capture more detail and accuracy from vocals and instruments. Mods for the AT2020. Audio-Technica AT2020 has a frequency response range of 20 Hz – 20 kHz, while MXL 770 comes with a frequency response range of 30 Hz – 20 kHz. Styled here in a limited edition reflective silver finish, the AT2020 Cardioid Condenser Microphone from Audio-Technica is designed for vocal and general instrument capturing in project and professional studio environments. A good microphone will need a good frequency response. However, there is a big boost on the high end areas for better clarity. Cardioid The AT2035 retains the same tonal characteristics [as the AT2020] while improving on its technical performance, by offering a flatter low-end response and significantly lower noise. With its moderate sensitivity (14.1 mV/Pa), this mic is likely better suited to loud sources than to distant miking or quiet acoustic instruments. As an Audio Technica Mic, you can be sure that the AT2020 packs a punch, and its performance is so good that it’s frequently ranked among the best condenser microphones on the market. Styled here in a limited edition reflective silver finish, the, Suitable for project/home-studio applications, High SPL handling and wide dynamic range provide maximum versatility, Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response, Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source, Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone. The lower half of the mic body is empty, save for a die-cut foam insert that presumably serves to eliminate body resonance. Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. [It] does a reasonable job of everything that you throw at it. The capsule is an electret, officially described as a “fixed-charge back plate, permanently polarized condenser”. The microphone includes a pivoting, threaded stand mount for accurate positioning. The standalone version comes with a pivoting stand mount, compatible with most micr ophone stands. Not responsible for typographical or illustrative errors. The AT 2020 delivers between 20Hz and 20kHz. The AT2020 sees a gradual decline beginning at roughly 350 Hz, which becomes even more apparent beginning at 200 Hz. The capsule features a low-mass, side-address diaphragm with a cardioid polar pattern for rejecting ambiance and noise at the off-axis sections of the microphone capsule. & Home App. #0907905; Sec. The mic also incorporates the smallest transformer we have ever seen. Deal. Please let us know! High SPL handling and wide dynamic range allow the AT2020 to capture loud signals with minimal noise and distortion. The AT2020 is an inexpensive condenser microphone with a fixed Cardioid polar pattern. A linear frequency response of 20 Hz to 20 kHz enables the flexibility to accurately reproduce signals from a wide variety of sources. The microphone includes a pivoting, threaded stand mount for accurate positioning. Audio-Technica designs, distributes and manufactures problem-solving audio equipment. As a result, the noise isolation is good. This will ensure that it rejects any off-axis sound. In simpler terms, this means the mic circuit does not need to provide polarization voltage to the capsule. What is the AT2041SP “Studio miking essentials” Pack? It is, therefore, an ideal vocal microphone and superb in the studio. The lowest point in bass response for the 2020 is between -4 and -5 dB at 80 Hz. The frequency response of the AT2020 is relatively flat, with slight cuts around the 70-80Hz mark, and a boost on the high end for added clarity. Moving on to performance, the frequency response of AudioTechnica AT2020 is flat though there are some slight cuts around the 70 to 80Hz area. The AT2020 mic is an ideal mic for studio applications with a surprisingly low price, specifications on par with the big leagues, its smooth frequency response, custom-engineered diaphragm and cardioid pattern. Deal. Serv. Both the MXL 770 and the AT2020 microphones support Phantom Power and can be powered with 48 dB. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms NYC DCA Lic.